xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
378
DGS-3420-28SC:admin#config igmp_snooping data_driven_learning vlan_name default
state enable
Command: config igmp_snooping data_driven_learning vlan_name default state
enable
Success.
DGS-3420-28SC:admin#
36-21 config igmp_snooping data_driven_learning
max_learned_entry
Description
This command is used to configure the maximum number of groups that can be learned by data
driven. When the table is full, the system will stop the learning of the new data-driven groups.
Traffic for the new groups will be dropped.
Format
config igmp_snooping data_driven_learning max_learned_entry <value 1-960>
Parameters
<value 1-960> - Enter the maximum number of groups that can be learned by data driven feature
here. This value must be between 1 and 960.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of groups that can be learned by data driven:
DGS-3420-28SC:admin# config igmp_snooping data_driven_learning
max_learned_entry 50
Command: config igmp_snooping data_driven_learning max_learned_entry 50
Success.
DGS-3420-28SC:admin#
36-22 config igmp_snooping forward_lookup_mode
Description
The command is used to configure the IGMP snooping forward lookup mode on the Switch.
Format
config igmp_snooping forward_lookup_mode [ip | mac]