xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
365
Example
To display the router ports on the default VLAN:
DGS-3420-28SC:admin#show router_ports vlan default
Command: show router_ports vlan default
VLAN Name : default
Static Router Port :
Dynamic Router Port :
Router IP :
Forbidden Router Port :
Total Entries: 1
DGS-3420-28SC:admin#
36-6 enable igmp_snooping
Description
This command allows you to enable IGMP snooping on the switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping on the switch:
DGS-3420-28SC:admin#enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-3420-28SC:admin#
36-7 disable igmp_snooping
Description
This command is used to disable IGMP snooping on the switch. IGMP snooping can be disabled
only if IP multicast routing is not being used. Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given IP interface.