xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
552
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an MLD snooping static group from the default VLAN, group FF1E::1:
DGS-3420-28SC:admin#delete mld_snooping static_group vlan default FF1E::1
Command: delete mld_snooping static_group vlan default FF1E::1
Success.
DGS-3420-28SC:admin#
55-7 show mld_snooping static_group
Description
This command is used to display the MLD snooping static groups.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan - (Optional) Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid
- (Optional) Specify the ID of the VLAN on which the static group resides.
<vlanid_list>
- Specify the VLAN ID list.
<ipv6addr> - (Optional) Specify the multicast group IPv6 address.
Restrictions
None.
Example
To display all the MLD snooping static groups:
DGS-3420-28SC:admin#show mld_snooping static_group
Command: show mld_snooping static_group
VLAN ID/Name IP Address Static Member Ports
------------- --------------- ---------------------
1/Default FF1E::1 9-10
Total Entries : 1
DGS-3420-28SC:admin#