xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
314
Parameters
<vlanid> - Specify the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an ERPS RAPS VLAN:
DGS-3420-28SC:admin#create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
DGS-3420-28SC:admin#
29-4 delete erps raps_vlan
Description
This command is used to delete an R-APS VLAN on the switch. When an R-APS VLAN is deleted,
all parameters related to this R-APS VLAN will also be deleted. This command can only be issued
when this ring is disabled or ERPS globally is disabled.
Format
delete erps raps_vlan <vlanid>
Parameters
<vlanid> - Specify the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an R-APS VLAN:
DGS-3420-28SC:admin#delete erps raps_vlan 4094
Command: delete erps raps_vlan 4094
Success.
DGS-3420-28SC:admin#