xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
376
DGS-3420-28SC:admin#show igmp_snooping forwarding
Command: show igmp_snooping forwarding
VLAN Name : default
Source IP : 10.90.90.114
Multicast Group: 225.0.0.0
Port Member : 2,7
VLAN Name : default
Source IP : 10.90.90.10
Multicast Group: 225.0.0.1
Port Member : 2,5
Total Entries : 2
DGS-3420-28SC:admin#
36-19 clear igmp_snooping data_driven_group
Description
This command is used to clear the IGMP snooping group learned by data driven.
Format
clear igmp_snooping data_driven_group [all | [vlan_name <vlan_name 32> | vlanid
<vlanid_list>] [<ipaddr> | all]]
Parameters
all - Specifies to clear all the entries learned by the data driven feature.
vlan_name - Specifies the VLAN name used.
<vlan_name 32> - Enter the VLAN name used here.
vlanid - Specifies that VLAN ID list used.
<vlanid_list> - Enter the VLAN ID list used here.
<ipaddr> - Enter the IP address of the data driven group to be cleared here.
all - Specifies that all the IP addresses will be cleared.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the IGMP snooping group learned by data driven:
DGS-3420-28SC:admin#clear igmp_snooping data_driven_group all
Command: clear igmp_snooping data_driven_group all
Success.
DGS-3420-28SC:admin#