xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
501
Restrictions
None.
Example
To display LLDP local port information for port 1:
DGS-3420-28SC:admin#show lldp local_ports 1
Command: show lldp local_ports 1
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : MAC Address
Port ID : 00-01-02-03-05-00
Port Description : D-Link DGS-3420-28SC R1.00.024
Port 1 on Unit 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
DGS-3420-28SC:admin#
48-18 show lldp mgt_addr
Description
This command is used to display the LLDP management address.
Format
show lldp mgt_addr {[ipv4 {<ipaddr>} | ipv6 {<ipv6addr>}]}
Parameters
ipv4 - (Optional) Specify the IPv4 address of the LLDP managament address entry.
<ipaddr> - Specify the IPv4 address of the LLDP managament address entry.
ipv6 - (Optional) Specify the IPv6 address of the LLDP managament address entry.
<ipv6addr> - Specify the IPv6 address of the LLDP managament address entry.
Restrictions
None.
Example
To display the LLDP management address: