xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
246
System 10.1.1.1 192.168.0.1
DGS-3420-28SC:admin#
21-19 show dhcp_relay option_60
Description
This command is used to display the DHCP relay option 60 entries.
Format
show dhcp_relay option_60 {[string <multiword 255> | ipaddress <ipaddr> | default]}
Parameters
string - (Optional) Display the entry whose string equals the string specified.
<multiword 255> - The string can be up to 255 characters long.
ipaddress - (Optional) Display the entry whose IP ipaddress equals the specified IP address.
<ipaddr> - Enter the IP address here.
default - (Optional) Display the default behaviour of DHCP relay option 60.
Note: If no parameter is specified, all DHCP option 60 entries will be displayed.
Restrictions
None.
Example
To display the DHCP option 60 entries:
DGS-3420-28SC:admin#show dhcp_relay option_60
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
10.90.90.100
10.90.90.101
10.90.90.102
Matching Rules:
String Match Type IP Address
------- --------- ---------
abc Exact Match 10.90.90.1
abcde Partial Match 10.90.90.2
abcdefg Exact Match 10.90.90.3
Total Entries: 3