xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
565
Example
To enable the data driven learning of an MLD snooping group on default VLAN:
DGS-3420-28SC:admin#config mld_snooping data_driven_learning vlan_name default
state enable
Command: config mld_snooping data_driven_learning vlan_name default state
enable
Success.
DGS-3420-28SC:admin#
55-21 config mld_snooping data_driven_learning
max_learned_entry
Description
This command is used to configure the maximum number of groups that can be learned by data
driven. When the table is full, the system will stop learning of the new data-driven groups. Traffic
for the new groups will be dropped.
Format
config mld_snooping data_driven_learning max_learned_entry <value 1-480>
Parameters
<value 1-480> - Specify the maximum number of groups that can be learned by data driven. The
default setting is 120.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of MLD snooping data driven learning entries as 50:
DGS-3420-28SC:admin#config mld_snooping data_driven_learning max_learned_entry
50
Command: config mld_snooping data_driven_learning max_learned_entry 50
Success.
DGS-3420-28SC:admin#