Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
914
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Event description: Logout through Telnet.
Log Message: Logout through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>, IP:
<ipaddr>).
Parameters description:
ipaddr: The IP address of telnet client.
username: the user name that used to login telnet server.
Informational
Interface
Event description: Port link up.
Log Message: Port <[unitID:]portNum> link up, <link state>
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
link state: for ex: , 100Mbps FULL duplex
Informational
Event description: Port link down.
Log Message: Port <[unitID:]portNum> link down
Parameters description:
unitID: 1.Interger value;2.Represent the id of the device in the
stacking system.
portNum: 1.Interger value;2.Represent the logic port number of the
device.
Informational
802.1X
Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from
(Username: <username>, Port: <[unitID:]portNum>, MAC:
<macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of thr authenticated device.
Warning
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, Port: <[unitID:]portNum>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
unitID: The unit ID.
portNum: The switch port number.
macaddr: The MAC address of the authenticated device.
Informational
RADIUS
Event description: VID assigned from RADIUS server after RADIUS
client is authenticated by RADIUS server successfully .This VID will
be assigned to the port and this port will be the VLAN untagged port
member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID> to
port <[unitID:]portNum> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of RADIUS assigned VLAN.
unitID: The unit ID.
portNum: The port number.
Username: The user that is being authenticated.
Informational
Event description: Ingress bandwidth assigned from RADIUS server
after RADIUS client is authenticated by RADIUS server
successfully .This Ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress
bandwith :<ingressBandwidth> to port <[unitID:]portNum>
(account : <username>)
Parameters description:
Informational