xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
379
Parameters
ip - Specifies that the multicast forwarding lookup will be based on the IP address.
mac - Specifies that the multicast forwarding lookup will be based on the MAC address
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the IGMP snooping forward lookup mode to be MAC-based:
DGS-3420-28SC:admin# config igmp_snooping forward_lookup_mode mac
Command: config igmp_snooping forward_lookup_mode mac
Success.
DGS-3420-28SC:admin#
36-23 show igmp_snooping forward_lookup_mode
Description
The command is used to display the IGMP snooping forward lookup mode on the Switch.
Format
show igmp_snooping forward_lookup_mode
Parameters
None.
Restrictions
None.
Example
To display the IGMP snooping forward lookup mode:
DGS-3420-28SC:admin#show igmp_snooping forward_lookup_mode
Command: show igmp_snooping forward_lookup_mode
IGMP snooping forward lookup mode: MAC address.
DGS-3420-28SC:admin#