xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
845
Restrictions
Only Administrator-level users can issue this command.
Example
To clear the current username of the RCP global server:
DGS-3420-28SC:admin#config rcp server clear username
Command: config rcp server clear username
Success.
DGS-3420-28SC:admin#
92-15 show rcp server
Description
This command is used to display Remote Copy Protocol (RCP) global server information.
Format
show rcp server
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display RCP global server information:
DGS-3420-28SC:admin#show rcp server
Command: show rcp server
RCP Server Address :
RCP Server Username : travel
DGS-3420-28SC:admin#
92-16 ping
Description
This command is used to send Internet Control Message Protocol (ICMP) echo messages to a
remote IP address. The remote IP address will then “echo” or return the message. This is used to
confirm connectivity between the switch and the remote device.