xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
576
DGS-3420-28SC:admin#config mld_snooping multicast_vlan forward_unmatched enable
Command: config mld_snooping multicast_vlan forward_unmatched enable
Success.
DGS-3420-28SC:admin#
56-14 config mld_snooping multicast_vlan auto_assign_vlan
Description
This command is used to enable the auto assignment of MLD control packets to the right MSM
VLAN. If auto assign vlan is enabled, the Switch would check for group matching in the profiles of
all multicast VLANs to which the ingress port belongs to. If there is a match, the result is "in profile"
and the matching multicast VLAN will be set as the packet VLAN. If this function is disabled, the
Switch will do VID checking first. If the group does not match the current profile binding to the
multicast VLAN, the Switch will drop this packet.
Format
config mld_snooping multicast_vlan auto_assign_vlan [enable | disable]
Parameters
enable - Specifies to enable the auto assign VLAN function.
disable - Specifies to disable the auto assign VLAN function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the auto assign VLAN function:
DGS-3420-28SC:admin#config mld_snooping multicast_vlan auto_assign_vlan enable
Command: config mld_snooping multicast_vlan auto_assign_vlan enable
Success.
DGS-3420-28SC:admin#