Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
836
DGS-3420-28SC:admin#upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\DGS-
3420.cfg
Command: upload cfg_toTFTP 10.48.74.121 dest_file c:\cfg\DGS-3420.cfg
Connecting to server.................. Done.
Upload configuration.................. Done.
DGS-3420-28SC:admin#
To upload all logs to a TFTP server:
DGS-3420-28SC:admin#upload log_toTFTP 10.48.74.121 dest_file c:\log\DGS-
3420.log
Command: upload log_toTFTP 10.48.74.121 dest_file c:\log\DGS-3420.log
Connecting to server.................. Done.
Upload log............................ Done.
DGS-3420-28SC:admin#
To upload a dangerous log:
DGS-3420-28SC:admin# upload attack_log_toTFTP 10.48.74.121 dest_file
c:\alert.txt
Command: upload attack_log_toTFTP 10.48.74.121 dest_file c:\alert.txt
Connecting to server................... Done.
Upload attack log...................... Done.
Success.
DGS-3420-28SC:admin#
92-5 upload attack_log_toRCP
Description
This command is used to upload the attack log file from the device to an RCP server.
Note: If a user specifies the relative file path, the path search strategy will depend on the server
system. For some systems, it will search the current user working directory first, and then search
the environment paths.
Format
upload attack_log_toRCP [{username <username>} {<ipaddr>} dest_file <path_filename 64>
| rcp: <string 128>] {unit <unit_id 1-12>}
Parameters
username - (Optional) The remote user name on the RCP Server.
<username> - Enter the remote username used here.
<ipaddr> - (Optional) Enter the IP address used for the configuration here.