xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
348
Format
config filter netbios [<portlist> | all] state [enable | disable]
Parameters
<portlist> - Specify the port or range of ports to configure.
all - Specify to configure all ports.
state - Specify the status of the filter to block NetBIOS packets.
enable - Enable the filter to block NetBIOS packets.
disable - Disable the filter to block NetBIOS packets.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the NetBIOS filter state:
DGS-3420-28SC:admin#config filter netbios 1-10 state enable
Command: config filter netbios 1-10 state enable
Success.
DGS-3420-28SC:admin#
33-8 show filter netbios
Description
This command is used to display the NetBIOS filter state on the switch.
Format
show filter netbios
Parameters
None.
Restrictions
None.
Example
To display the NetBIOS filter state:
DGS-3420-28SC:admin#show filter netbios
Command: show filter netbios
Enabled Ports: 1-3