xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
396
Example
To delete an IPv6 static route:
DGS-3420-28SC:admin#delete ipv6route default System FEC0::5
Command: delete ipv6route default System FEC0::5
Success.
DGS-3420-28SC:admin#
38-6 show ipv6route
Description
This command is used to display the switch’s current IPv6 routing table.
Format
show ipv6route {[<ipv6networkaddr> | <ipv6addr>]} {[static | ripng | hardware]}
Parameters
<ipv6networkaddr> - Enter the IPv6 destination network address of the route.
<ipv6addr> - Enter the IPv6 address.
static - Display the static route entries.
ripng - Display the RIPng route entries.
hardware - Display the route entries which have been written into hardware table.
Restrictions
None.
Example
To display an IPv6 route:
DGS-3420-28SC:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0 Protocol: Static Metric: 1
Next Hop : FEC0::5 IPIF : System
Total Entries: 1
DGS-3420-28SC:admin#