Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
919
ipv6address: IPv6 address.
Event description: Logout.
Log Message: Logout through <Console | Telnet | Web(SSL)| SSH>
(Username: <username>, IP: <ipaddr | ipv6address>).
Parameters description:
ipaddr: IP address.
username: user name.
ipv6address: IPv6 address.
Informational
Event description: session timed out.
Log Message: <Console | Telnet | Web(SSL)| SSH> session timed
out (Username: <username>, IP: <ipaddr | ipv6address>).
Parameters description:
ipaddr: IP address.
username: user name.
ipv6address: IPv6 address.
Informational
Event description: SSH server is enabled.
Log Message: SSH server is enabled
Informational
Event description: SSH server is disabled.
Log Message: SSH server is disabled
Informational
Event description: Authentication Policy is enabled.
Log Message: Authentication Policy is enabled (Module: AAA).
Informational
Event description: Authentication Policy is disabled.
Log Message: Authentication Policy is disabled (Module: AAA).
Informational
Event description: Login failed due to AAA server timeout or
improper configuration.
Log Message: Login failed through <Console | Telnet | Web(SSL)|
SSH> from <ipaddr | ipv6address> due to AAA server <ipaddr |
ipv6address> timeout or improper configuration (Username:
<username>).
Parameters description:
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Warning
Event description: Successful Enable Admin authenticated by AAA
local or none or server.
Log Message: Successful Enable Admin through <Console | Telnet |
Web(SSL)| SSH> from <ipaddr | ipv6address> authenticated by
AAA <local | none | server <ipaddr | ipv6address>> (Username:
<username>).
Parameters description:
local: enable admin by AAA local method.
none: enable admin by AAA none method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Informational
Event description: Enable Admin failed due to AAA server timeout or
improper configuration.
Log Message: Enable Admin failed through <Console | Telnet |
Web(SSL)| SSH> from <ipaddr | ipv6address> due to AAA server
<ipaddr | ipv6address> timeout or improper configuration
(Username: <username>)
Parameters description:
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Warning
Event description: Enable Admin failed authenticated by AAA local or
server.
Log Message: Enable Admin failed through <Console | Telnet |
Web(SSL)| SSH> from <ipaddr | ipv6address> authenticated by
AAA < local | server <ipaddr | ipv6address>> (Username:
<username>).
Parameters description:
local: enable admin by AAA local method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
Warning