xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
188
Format
show route preference {[local | static | default | rip]}
Parameters
local - (Optional) Display the preference of local route.
static - (Optional) Display the preference of static route.
default - (Optional) Display the preference of default route.
rip - (Optional) Display the preference of RIP route.
Restrictions
None.
Example
To display the route preference for all route types:
DGS-3420-28SC:admin#show route preference
Command: show route preference
Route Preference Settings
Protocol Preference
---------- ----------
RIP 100
Static 60
Default 1
Local 0
DGS-3420-28SC:admin#
17-3 create route redistribute dst rip src
Description
This command is used to redistribute routing information from other routing protocols to RIP. When
the metric is specified as 0, the metric in the original route will become the metric of the
redistributing RIP routes transparently. If the metric of the original routes is greater than 16, the
route will be not redistributed.
Format
create route redistribute dst rip src [local | static] {metric <value 0-16>}
Parameters
dst - Specifies the target protocol.
src - Specifies the source protocol.
local - To redistribute local routes to RIP.
static - To redistribute static routes to RIP.