xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
366
Format
disable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable IGMP snooping:
DGS-3420-28SC:admin#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3420-28SC:admin#
36-8 show igmp_snooping
Description
This command is used to display the current IGMP snooping configuration on the switch.
Format
show igmp_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN to display the IGMP snooping configuration.
<vlan_name 32>
- Specify the name of the VLAN. The maximum length is 32 characters.
vlanid - (Optional) Specify the VLAN ID to display the IGMP snooping configuration.
<vlanid_list> - Specify a range of VLAN IDs.
Note: If no parameter is specified, the system will display all current IGMP snooping
configuration.
Restrictions
None.
Example
To show IGMP snooping: