Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
178
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear all the CFM packet RX/TX counters:
DGS-3420-28SC:admin#clear cfm pkt_cnt
Command: clear cfm pkt_cnt
Success.
DGS-3420-28SC:admin#
To clear the CFM packet CCM counters:
DGS-3420-28SC:admin#clear cfm pkt_cnt ccm
Command: clear cfm pkt_cnt ccm
Success.
DGS-3420-28SC:admin#
14-27 show cfm remote_mep
Description
This command is used to display CFM remote MEP information.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
Parameters
mepname - Specify the MEP name.
<string 32> - Specify the MEP name. The maximum length is 32 characters.
md - Specify the maintenance domain name.
<string 22> - Specify the maintenance domain name. The maximum length is 22 characters.
md_index - Specify the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma - Specify the maintenance association name.
<string 22> - Specify the maintenance association name. The maximum length is 22
characters.
ma_index - Specify the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid
- Specify the MEPID.
<int 1-8191>
- Specify the MEP MEPID between 1 and 8191.
remote_mepid - Specify the remote MEPID.
<int 1-8191> - Specify the remote MEPID between 1 and 8191.