xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
58
Note: This Switch also support the assignment of user privilege by a TACACS+ server.
Note: TACACS, XTACACS and TACACS+ are separate entities and are not compatible.
The Switch and the server must be configured exactly the same, using the same
protocol. (For example, if the Switch is set up for TACACS authentication, so must
be the host server.)
4-1 enable authen_policy
Description
This command is used to enable system access authentication policy. When enabled, the device
will adopt the login authentication method list to authenticate the user for login, and adopt the
enable authentication mothod list to authenticate the enable password for promoting the user‘s
privilege to Administrator level.
Format
enable authen_policy
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable system access authentication policy:
DGS-3420-28SC:admin#enable authen_policy
Command: enable authen_policy
Success.
DGS-3420-28SC:admin#
4-2 disable authen_policy
Description
This command is used to disable system access authentication policy. When authentication is
disabled, the device will adopt the local user account database to authenticate the user for login,
and adopt the local enable password to authenticate the enable password for promoting the user‘s
privilege to Administrator level.
Format
disable authen_policy