Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
367
DGS-3420-28SC:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Data Driven Learning Max Entries : 120
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disabled
Fast Leave : Disabled
Proxy Reporting : Enabled
Proxy Reporting Source IP : 0.0.0.0
Rate Limit : No Limitation
Version : 3
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3420-28SC:admin#
36-9 show igmp_snooping group
Description
This command is used to display the current IGMP snooping group configuration on the switch.
Format
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipaddr>}} {data_driven}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view IGMP snooping group
configuration information.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN for which to view IGMP snooping group
information.
<vlanid_list> - Specify the VLAN ID list.
ports - (Optional) Specify the list of ports for which to view IGMP snooping group information.
<portlist> - Specify a range of ports to be configured.
<ipaddr> - (Optional) Specify the group IP address for which to view IGMP snooping group
information.
data_driven - (Optional) Specifies that the data driven groups will be included in the display.