Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
420
Example
To display address binding information:
DGS-3420-28SC:admin#show address_binding
Command: show address_binding
Trap/Log : Disabled
DHCP Snoop(IPv4) : Disabled
DHCP Snoop(IPv6) : Disabled
ND Snoop : Disabled
DGS-3420-28SC:admin#
To display address binding information for all ports:
DGS-3420-28SC:admin#show address_binding ports
Command: show address_binding ports
ARP: ARP Inspection IP: IP Inspection
Port ARP IP Protocol Zero IP DHCP Packet Stop Learning
Threshold/Mode
----- -------- -------- ----- --------- ----------- --------------
1 Loose Disabled IPv4 Allow Forward 100/Stop
2 Strict Enabled IPv6 Not Allow Not Forward 200/Normal
3 Disabled Enabled All Not Allow Not Forward 200/Normal
4 Strict Disabled All Not Allow Not Forward 200/Normal
5 Disabled Disabled All Not Allow Not Forward 200/Normal
6 Strict Disabled All Not Allow Not Forward 200/Normal
7 Disabled Disabled All Not Allow Not Forward 200/Normal
8 Strict Disabled All Not Allow Not Forward 200/Normal
9 Disabled Disabled All Not Allow Not Forward 200/Normal
10 Strict Disabled All Not Allow Not Forward No Limit/Normal
11 Disabled Disabled All Not Allow Not Forward 200/Normal
12 Strict Disabled All Not Allow Not Forward 200/Normal
DGS-3420-28SC:admin#
41-9 show address_binding blocked
Description
This command is used to display address binding information for blocked entries.
Format
show address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]