Filter
Top Products
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
721
Parameters
<portlist> - Specify the ports to be configured.
all - Specify to configure all ports.
analyzer_server_id - Specify the ID of an analyzer server where the packet will be forwarded.
<value 1-4> - Specify the ID of an analyzer server where the packet will be forwarded.
interval
- (Optional) Specify the maximum number of seconds between successive statistic
counters information. If set to disable, the counter-poller is disabled. If the interval is not
specified, its default value is disable.
disable - Specify to disable the interval.
<sec 20-120> - Specify the interval, in seconds, between 20 and 120.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create the sFlow counter poller:
DGS-3420-28SC:admin#create sflow counter_poller ports 1 analyzer_server_id 1
Command: create sflow counter_poller ports 1 analyzer_server_id 1
Success.
DGS-3420-28SC:admin#
75-12 config sflow counter_poller ports
Description
This command is used to configure the sflow counter poller parameters. If a user wants to change
the analyzer server ID, they need to delete the counter poller and create a new one.
Format
config sflow counter_poller ports [<portlist> | all] interval [disable | <sec 20-120>]
Parameters
<portlist> - Specify the ports to be configured.
all - Specify to configure all ports.
interval - Specify the maximum number of seconds between successive samples of the
counters. If set to disabled, the counter sample is disabled.
disable - Specify to disable the interval.
<sec 20-120> - Specify the interval, in seconds, between 20 and 120.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the sFlow counter poller parameters interval to 50 for port 1: