Filter
Top Products
C-6
ACCESSORIES
C-6
POWER WAVE 455/POWER FEED 10
10. Install an Optional Output Connector into the
Control Box cabinet, if not already present.
11. Mount the Control Box cabinet to the work sta-
tion fixture at this time, if desired. The four holes
in the back wall of the Control Box cabinet can
be used for this purpose.
12. Re-install the lower and middle option panels by
reversing the removal process. While re-
installing the option panels, ensure clearance
between Optional Input Connector components,
Control Box wiring harness, and option panel
wiring harness (if any).
REEL ADAPTERS
K162H - WIRE SPINDLE ADAPTER
Spindle for boom mounting Readi-Reels and 2 in. (51
mm) I.D. spools with up to 60 lb (27.2 kg) capacity.
User mounted to appropriately prepared boom
framework. Includes an easily adjustable friction
brake for control of overrun (a 2 in. spindle is stan-
dard on Power Feed 10 bench model).
When a 2 in. (51 mm) spindle is used with Readi-
Reels, or coils not on 12 in. (305 mm) O.D. spools,
an adapter is required:
K1504-1 - COIL ADAPTER
Permits 50 lb to 60 lb (22.7 to 27.2 kg) coils to be
mounted on 2 in. (51 mm) O.D. spindles.
K435 - COIL ADAPTER
Permits 14 lb (6 kg) Innershield coils to be mounted
on 2 in. (51 mm) O.D. spindles.
K363P - READI-REEL ADAPTER
Adapts Lincoln Readi-Reel coils of electrode 30 lb
(14 kg) and 22 lb (10 kg) to a 2 in. (51 mm) spindle.
Durable molded plastic one piece construction.
Designed for easy loading; adapter remains on spin-
dle for quick changeover.
K438 - READI-REEL ADAPTER
Adapts Lincoln Readi-Reel coils of electrode 50 to
60 lb (22.7 to 27.2 kg) to a 2 in. (51 mm) spindle.
GUNS AND GUN ADAPTERS
The Power Feed 10 wire feeder is equipped with a
factory installed K1500-2 gun connection kit. This kit
is for guns having a Tweco™ #2-#4 connector. The
Power Feed 10 has been designed to make connect-
ing a variety of guns easy and inexpensive with the
K1500 series of gun connection kits. Gun trigger and
dual procedure lead connections connect to the sin-
gle 5 pin receptacle on the front of the Feed Head
box.
FAST-MATE™ GUNS (INCLUDING THE
MAGNUM 450 WATER COOLED GUN)
A K489-7 adapter will install directly into the wire
drive feedplate, to provide for use of guns with Fast-
Mate™ or European style gun connections. This
K489-7 will handle both standard Fast-Mate™and
Dual Schedule Fast-Mate™ guns.
Another way to connect a gun with a Fast-Mate™ or
European style gun connector to the Power Feed 10,
is to use the K489-2 Fast-Mate™ adapter kit.
Installation of this adapter also requires a K1500-1
gun connector.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC