Filter
Top Products
Chapter 5 Device Network Settings
Vantage CNM User’s Guide
112
" Be careful not to list your computer’s MAC address and set the Action field to
Deny Association when managing the device via a wireless connection. This
would lock you out.
Figure 49 Device Operation > Device Configuration > Network > Wireless Card > MAC Filter
The following table describes the fields in this screen.
Table 41 Device Operation > Device Configuration > Network > Wireless Card > MAC Filter
LABEL DESCRIPTION
Activate
MAC Filter
Select this to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny Association to block access to the router, MAC addresses not listed will
be allowed to access the device. Select Allow Association to permit access to the
router, MAC addresses not listed will be denied access to the device.
Index This is the index number of the MAC address.
User Name Enter a descriptive name for the MAC address.
MAC
Address
Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc of the wireless stations that are
allowed or denied access to the device in these address fields.
Apply Click Apply to save your changes back to the device.
Reset Click Reset to begin configuring this screen afresh.