Filter
Top Products
Vantage CNM User’s Guide
309
CHAPTER 21
CNM System Setting
Use these screens to configure Vantage CNM server settings such as servers configuration,
system maintenance, create and define device owner, software upgrade, license management,
and about.
21.1 Servers Configuration
You can configure these servers as you install Vantage CNM (in the installation wizard) or
after you install it in this screen.
Configure the Vantage CNM public IP server address, FTP server (for firmware upload), and
mail server (for Vantage CNM notifications and reports) in this screen. These IP addresses will
be the same as the Vantage CNM server computer if they are all on the same computer.
The FTP server is used for file transfers, such as firmware upgrade.
The SMTP server is used for e-mail notifications.
You should know each server's IP address, username and password. File transfers (FTP) and e-
mail notifications (SMTP) will not work in Vantage CNM if these are incorrectly configured.
To open this screen, click CNM System Setting in the menu bar and then click Configuration
> Servers > Configuration in the navigation panel.
" Make sure the FTP account’s permission includes Files (read/write/delete),
Directories (list/create/delete) and Sub-directories (inherit).