Filter
Top Products
Chapter 12 VPN Community
Vantage CNM User’s Guide
259
Click the Load a BB icon to use phase 1 or phase 2 setting from an existing building block.
The following pop-up screen appears.
Figure 140 VPN Management > VPN Community > Add/Edit > Load a BB
Select a building block from the list box, and click Apply. Or click Cancel to close the screen
without applying any setting.
Click the Save as a BB icon to save the current phase 1 or phase 2 setting as a building block.
The following pop-up screen appears.
Figure 141 VPN Management > VPN Community > Add/Edit > Save as a BB
Enter the name of the new building block, and click Apply. The name must be 1-32
alphanumeric characters or underscores (_). It cannot include spaces. The name is case-
sensitive.
Some fields display vary depends on the community type you selected as shown next.
Figure 142 VPN Community Types
Full Mesh
Hub & Spoke
Remote Access