Filter
Top Products
Vantage CNM User’s Guide
55
CHAPTER 4
Device General Settings
This section configures device general settings.
4.1 System
Use this screen to set the password, system name, domain name, idle timeout, and DNS
servers for the device. Please see the device’s User’s Guide for more information about any of
these screens or fields. To open this screen, click Device Operation in the menu bar, and click
Device Configuration > General > System in the navigation panel.
Figure 24 Device Operation > Device Configuration > General > System
The following table describes the fields in this screen.
Table 11 Device Operation > Device Configuration > General > System
FIELD DESCRIPTION
Password Enter the password used to access the device.
Confirm Password Re-enter the password used to access the device.
System Name Enter a unique name here for the device for identification purposes. The
device name cannot exceed 31 characters.
Domain Name The Domain Name entry is what is propagated to the DHCP clients on the
LAN side of the target device. If you leave this blank, the domain name
obtained by the device via DHCP from the ISP is used.
Administrator
Inactivity Timer
Set how long a management session can remain idle before it expires. After it
expires, you have to log back into the device.