Filter
Top Products
Chapter 7 Device Advanced Settings
Vantage CNM User’s Guide
212
The following table describes the labels in this screen.
Table 94 Device Operation > Device Configuration > Advanced > Remote Management
LABEL DESCRIPTION
HTTPS
Server
Certificate
Select the Server Certificate that the device will use to identify itself. The device is
the SSL server and must always authenticate itself to the SSL client (the computer
which requests the HTTPS connection with the device).
Authenticate
Client
Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the device by sending the device a certificate. To do that the
SSL client must have a CA-signed certificate from a CA that has been imported as a
trusted CA on the device.
Server Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the device, for example 8443, then you
must notify people who need to access the device web configurator to use “https://
device IP Address:8443” as the URL.
Server Access Select the interface(s) through which a computer may access the device using this
service.
You can allow only secure web configurator access by setting the HTTP Server
Access field to Disable and setting the HTTPS Server Access field to an
interface(s).