Filter
Top Products
Chapter 7 Device Advanced Settings
Vantage CNM User’s Guide
210
Figure 102 Device Operation > Device Configuration > Advanced > DNS > DHCP
The following table describes the labels in this screen.
Table 93 Device Operation > Device Configuration > Advanced > DNS > DHCP
LABEL DESCRIPTION
DNS Servers
Assigned by DHCP
Server
The device passes a DNS (Domain Name System) server IP address to the
DHCP clients.
Selected Interface Select an interface from the drop-down list box to configure the DNS servers for
the specified interface.
# This is the number of an individual entry.
DNS These read-only labels represent the DNS servers.
IP Select From ISP if your ISP dynamically assigns DNS server information (and
the device's WAN IP address). Use the drop-down list box to select a DNS
server IP address that the ISP assigns in the field to the right.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right. If you chose User-Defined, but
leave the IP address set to 0.0.0.0, User-Defined changes to None after you
click Apply. If you set a second choice to User-Defined, and enter the same IP
address, the second User-Defined changes to None after you click Apply.
Select DNS Relay to have the device act as a DNS proxy. The device's LAN,
DMZ or WLAN IP address displays in the field to the right (read-only). The
device tells the DHCP clients on the LAN, DMZ or WLAN that the device itself is
the DNS server. When a computer on the LAN, DMZ or WLAN sends a DNS
query to the device, the device forwards the query to the device's system DNS
server (configured in the DNS System screen) and relays the response back to
the computer. You can only select DNS Relay for one of the three servers; if
you select DNS Relay for a second or third DNS server, that choice changes to
None after you click Apply.
Select None if you do not want to configure DNS servers. You must have
another DHCP sever on your LAN, or else the computers must have their DNS
server addresses manually configured. If you do not configure a DNS server,
you must know the IP address of a computer in order to access it.
Apply Click Apply to save your changes back to the device.
Reset Click Reset to begin configuring this screen afresh.