Filter
Top Products
Chapter 7 Device Advanced Settings
Vantage CNM User’s Guide
214
SNMP
Configuration
Get Community Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Set Community Enter the Set community, which is the password for incoming Set requests from
the management station. The default is public and allows all requests.
Trap Community Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Trap Destination Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Service Access Select the interface(s) through which a computer may access the device using this
service.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
device using this service.
Select All to allow any computer to access the device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the device using this service.
DNS
Server Port The DNS service port number is 53 and cannot be changed here.
Service Access Select the interface(s) through which a computer may send DNS queries to the
device.
Secure Client IP
Address
A secure client is a “trusted” computer that is allowed to send DNS queries to the
device.
Select All to allow any computer to send DNS queries to the device.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the device.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 94 Device Operation > Device Configuration > Advanced > Remote Management
LABEL DESCRIPTION