Filter
Top Products
Chapter 5 Device Network Settings
Vantage CNM User’s Guide
99
5.3.8 WAN Backup (Prestige)
Use this screen to change your device’s WAN backup settings. To open this screen, select a
device, click Device Operation in the menu bar and then click Device Configuration >
Network > WAN > Backup in the navigation panel.
Max Idle Timeout
(Appears when you use
PPPoA and PPPoE
encapsulation)
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
Zero Configuration Select this if you want the device to automatically try to configure the
Internet connection. See the device’s User’s Guide for more information.
Subnet Mask (Appears
when you use ENET
ENCAP encapsulation)
Enter the subnet mask provided by your ISP.
ENET ENCAP Gateway
(Appears when you use
ENET ENCAP
encapsulation)
Enter the IP address of the gateway provided by your ISP.
Apply Click Apply to save the changes.
Reset Click Reset to begin configuring this screen afresh.
Table 29 Device Operation > Device Configuration > Network > WAN > Setup (Prestige)
LABEL DESCRIPTION