Filter
Top Products
Chapter 15 Device Status Monitor
Vantage CNM User’s Guide
278
3G Card Model This displays the model name of your 3G card.
3G Card
Firmware
Revision
This displays the version of the firmware currently used in the 3G card.
3G Card IMEI This field is available only when you insert a GSM (Global System for Mobile
Communications) or UMTS (Universal Mobile Telecommunications System) 3G
card.
This displays the International Mobile Equipment Identity (IMEI) which is the serial
number of the GSM or UMTS 3G wireless card. The IMEI is a unique 15-digit
number used to identify a mobile device.
3G Card IMSI This field is available only when you insert a GSM or UMTS 3G card.
This displays the International Mobile Subscriber Identity (IMSI) stored in the SIM
(Subscriber Identity Module) card. The SIM card is installed in a mobile device and
used for authenticating a customer to the carrier network. The IMSI is a unique 15-
digit number used to identify a user on a network.
3G Card ESN This field is available only when you insert a CDMA (Code Division Multiple
Access) 3G card.
This shows the ESN (Electronic Serial Number) of the inserted CDMA 3G card.
The ESN is the serial number of a CDMA 3G card and is similar to the IMEI on a
GSM or UMTS 3G card.
Remaining Data
Budget
This field is available only when you enable budget control in the Network > WAN
> 3G (WAN 2) screen.
This shows how much data (in bytes) can still be transmitted through the 3G
connection before the Vantage CNM takes the actions you specified in the 3G
(WAN 2) screen.
Note: The budget counters will not be reset when you restore the
factory defaults. The budget counters are saved to the flash
every hour or when the 3G connection is dropped. If you
restart the Vantage CNM within one hour, any change in the
counters will not be saved.
Remaining Time
Budget
This field is available only when you enable budget control in the 3G (WAN 2)
screen.
This shows the amount of time (in hours and minutes) the 3G connection can still
be used before the Vantage CNM takes the actions you specified in the 3G (WAN
2) screen.
Reset time and
data budget
counters
This button is available only when you enable budget control in the 3G (WAN 2)
screen.
Click this button to reset the time and data budgets. The count starts over with the
3G connection’s full configured monthly time and data budgets. This does not
affect the normal monthly budget restart.
3G Signal Level
Signal Strength This displays the signal strength graph of the 3G wireless network in dBm for the
past one day.
The Start Time shows the starting time of the signal strength graph and the End
Time shows the ending time of the graph. This graph refreshes automatically
every 5 minutes by default. The Next Refresh Time shows the time left for the
next graph refreshing.
3G Alarms The following fields display alarms
Click Show Alarms>> to see more information about the 3G card and connection
alarms or click Hide Alarms<< to not display it.
Table 134 Monitor > Device Status > 3G Card
LABEL DESCRIPTION