Filter
Top Products
Chapter 7 Device Advanced Settings
Vantage CNM User’s Guide
195
7.2 Port Forwarding
Use this screen to configure port forwarding on the device. To open this screen, click a device,
click Device Operation in the menu bar, and then click Device Configuration > Advanced >
NAT > Port Forwarding in the navigation panel.
Port Forwarding
Rules
Click Copy to WAN 2 (or Copy to WAN 1) to duplicate this WAN port's NAT port
forwarding rules on the other WAN port.
Note: Using the copy button overwrites the other WAN port's existing
rules.
The copy button is best suited for initial NAT configuration where you have
configured NAT port forwarding rules for one port and want to use similar rules for
the other WAN port. You can use the other NAT screens to edit the NAT rules after
you copy them from one WAN port to the other.
Port Triggering
Rules
Click Copy to WAN 2 (or Copy to WAN 1) to duplicate this WAN port's NAT trigger
port rules on the other WAN port.
Note: Using the copy button overwrites the other WAN port's existing
rules.
The copy button is best suited for initial NAT configuration where you have
configured NAT trigger port rules for one port and want to use similar rules for the
other WAN port. You can use the other NAT screens to edit the NAT rules after you
copy them from one WAN port to the other.
Edit Click Edit to advance to the selected feature.
Apply Click Apply to begin configuring this screen afresh.
Table 79 Device Operation > Device Configuration > Advanced > NAT > NAT Overview
LABEL DESCRIPTION