Filter
Top Products
Chapter 5 Device Network Settings
Vantage CNM User’s Guide
66
5.2.2 IP Alias
" This section refers only to the LAN screen, but the information is applicable for
the LAN, WLAN, and DMZ screens.
Use this screen to configure logical interfaces (subnets) via its single physical Ethernet
interface with the device itself being the gateway for each network. You can also configure
firewall rules to control access between the logical networks. To open this screen, click Device
Operation > Device Configuration > Network > LAN > IP Alias.
Figure 30 Device Operation > Device Configuration > Network > LAN > IP Alias
The following table describes the fields in this screen.
Apply Click Apply to save your changes back to the device.
Reset Click Reset to begin configuring this screen afresh.
Table 15 Device Operation > Device Configuration > Network > LAN > Static DHCP
(continued)
LABEL DESCRIPTION
Table 16 Device Operation > Device Configuration > Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1,2 Select the check box to configure another network for the device.
IP Address Enter the IP address of the device in dotted decimal notation.