ZyXEL Communications vantage cnm Dust Collector User Manual


 
Vantage CNM User’s Guide
59
CHAPTER 5
Device Network Settings
The screens explained network settings such as LAN, WAN, wireless card.
The menus and screens may vary for different ZyXEL products. For example, click Device
Configuration > Network Interface for ZLD-based device’s network settings. This
document uses the ZyNOS ZyWALL settings for each screen description. For ZLD-based
settings, please see device’s User’s Guide for the detailed information. An example is shown
next.
Figure 26 Example: Device Operation > Device Configuration > Network > Interface (ZLD)
5.1 LAN (ZyNOS ZyWALL)
" This section refers only to the LAN screen, but the information is applicable for
the LAN, WLAN, and DMZ screens.
Use this screen to configure the DHCP settings, TCP/IP settings, and NetBIOS settings for the
LAN on a ZyNOS ZyWALL. To open this screen, click Device Operation in the menu bar,
and click Device Configuration > Network > LAN > LAN in the navigation panel.