Filter
Top Products
Chapter 5 Device Network Settings
Vantage CNM User’s Guide
68
Figure 31 Device Operation > Device Configuration > Network > WAN > General (ZyNOS
ZyWALL)
The following table describes the fields in this screen.
Table 17 Device Operation > Device Configuration > Network > WAN > General (ZyNOS
ZyWALL)
LABEL DESCRIPTION
WAN Priority
WAN2 Priority
Traffic Redirect
Dial Backup
The default WAN connection is "1' as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority
of the routes is WAN, Traffic Redirect and then Dial Backup (dial backup does not
apply to all device models):
You have two choices for an auxiliary connection in the event that your regular WAN
connection goes down. If Dial Backup is preferred to Traffic Redirect, then type
"14" in the Dial Backup Priority (metric) field (and leave the Traffic Redirect
Priority (metric) at the default of "15").
Active Select this check box to have the device use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The device
automatically forwards traffic to this IP address if the device's Internet connection
terminates.