Filter
Top Products
4-3
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Management Information
Note The Cisco 12000/10720 Router Manager Chassis Management windows cannot be opened
when multiple objects are selected (the menu options to open the windows are grayed out).
Available menu options can be launched from a site object containing the required objects.
Management Information
The Management Information window allows you to perform the following functions:
• Configure the chassis IP address fields
• Set or change IOS CLI username and passwords
• Set or change the system attributes
Caution It is strongly recommended that only a System Administrator should have access to the
Management Information window, because access passwords can be configured and
modified in this window.
The Management Information section covers the following areas:
• Viewing the Management Information Window
• System Configuration
• Entering or Changing IOS CLI Username and Passwords
• Management Information Window—Detailed Description
Viewing the Management Information Window
To view the Management Information window, proceed as follows:
Step 1 Right click on the chassis object and select the Configuration>Management Information option. See
Table 4-1 on page 4-2 for information on which objects allow you to launch the Management
Information window. The Management Information window appears, with the Configuration tab
displayed.
Initiating a Telnet
Service
No Yes Yes Yes Yes Technology Specific Tools>Initiate Telnet Service
Configuration Editor No Yes No No No Technology Specific Tools>Open Configuration
Editor
Table 4-1 Launching the Chassis Management Windows (continued)
Cisco 12000/10720 Router
Manager Window/Task
Objects (that can be selected) to Open the
Window
Menu Options to Select to Open Window
Site Chassis
12000
Series
Chassis
10720
Module Interface