Cisco Systems 12000/10700 V3.1.1 Router User Manual


 
11-9
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
CAR Policy Configuration
Step 4 In the Actions area, choose the right facing arrow to move the selected access list into the Required
Access List.
Step 5 Choose Save to save the changes.
CAR Policy Configuration WindowDetailed Description
The CAR Policy Configuration displays a single CAR Policy Configuration tab.
CAR Policy Configuration Tab
The CAR Policy Configuration tab displays four tabs: CAR Parameters, Access List Choice, Conform
Action, and Exceed Action.
CAR Parameters
The CAR Parameters area contains the following fields:
Traffic DirectionChoose either incoming (input) or outgoing (output) traffic.
Average Transmission RateNormal transmission rate based on a long term average in bps.
Normal Burst Size (in bytes)Bytes allowed in a burst before some packets will exceed the rate limit.
Larger bursts are more likely to exceed the rate limit.
Maximum Burst Size (in bytes)Bytes allowed in a burst before all packets will exceed the rate limit.
This value should be greater than or equal to the normal burst size.
Access List Choice
The Access List Choice area contains the following fields:
With Access ListChoose yes to apply a selected access list to the selected CAR policy; choose No if
you do not want to apply an access list to the selected CAR policy.
Available Access ListPane that lists all created access lists.
ActionsContains two arrow buttons to move access lists between the available access list and the
required access list.
Required Access ListPane that lists all access lists, which are required to be associated with the
selected CAR policy.
Conform Action
The Conform Action area contains the following fields:
ContinueEvaluate the next rate-limit command.
DropChoose to drop the packet or not.
TransmitChoose to transmit the packet or not.
Set Prec. To X and Continue(numbers 0-7) Set precedence to an integer and continue.
Set Prec. To X and Transmit(numbers 0-7) Set precedence to an integer and transmit.