Filter
Top Products
16-21
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
Figure 16-14 VPN Status Window
Step 2
Choose a Chassis from the list displayed at the left of the window. For further information on the fields
displayed in this window, see the “VPN Status Window—Detailed Description” section on page 16-21.
VPN Status Window—Detailed Description
The VPN Status window displays four tabs: General, Routes, Route Targets, and BGP Neighbor.
General Tab
The General tab (see Figure 16-18) displays a single General area.
General
The General area displays the following information:
No. of Configured VRFs—Displays the number of VRFs that are configured on this node.
No. of Connected Interfaces—Displays the total number of interfaces that are connected to the selected
VRF.
No. of Maximum Possible Routes—Displays the maximum number of allowable routes on the device.
No. of Active VRFs—Displays the number of VRFs that are active on this node.
Notification Status—Displays the notification status.