Filter
Top Products
9-9
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
DS3/E3 Interface Status
Step 2 Choose a Chassis, Module, and ATM Interface from the lists displayed at the left of the window. The
fault information is displayed for the selected ATM interface.
ATM Interface Faults Window—Detailed Description
The ATM Interface Faults window displays a single Fault tab.
Fault Tab
The Fault tab (see Figure 9-3) displays three areas: General Errors, SONET Frame Errors, and
DS1/E1/DS3/E3 Errors.
General Errors
The General Errors area is not applicable to Cisco 12000/10720 Router Manager.
SONET Frame Errors
The SONET Frame Errors area displays the following information:
Path FEBE Errors—Number of G1 (path FEBE) errors on the physical interface.
Line FEBE Errors—Number of Z2 (line FEBE) errors on the physical interface.
Path Parity Errors—Number of B3 (BIP) errors on the physical interface.
Line Parity Errors—Number of B2 (BIP) errors on the physical interface.
Section Parity Errors—Number of B1 (BIP) errors on the physical interface.
DS1/E1/SD3/E3 Errors
The DS1/E1/DS3/E3 Errors area is not applicable to Cisco 12000/10720 Router Manager.
DS3/E3 Interface Status
The DS3/E3 Interface Status section covers the following areas:
• Viewing the DS3/E3 Interface Status Window
• DS3/E3 Interface Status Window—Detailed Description
Viewing the DS3/E3 Interface Status Window
To view the DS3/E3 Interface Status window, proceed as follows:
Step 1 Right click on the DS3/E3 interface object and choose Cisco 12000/10720 Manager>Fault>
Interface>DS3> Status. See Table 9-2 on page 9-2 for information on which objects allow you to
launch the DS3/E3 Interface Status window.