Filter
Top Products
8-16
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 8 Interface Configuration
POS Interface Configuration
Figure 8-6 POS Interface Configuration Window—POS Config Tab
Step 2
Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.
Configuring a POS Interface
To configure a POS Interface, follow these steps:
Step 1 Open the POS Interface Configuration window. See “Viewing the POS Interface Configuration Window”
section on page 8-15 for further details.
Step 2 Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.
Step 3 Choose Edit > Apply Profile and then choose the profile you wish to apply from the list displayed (if
you are applying a profile). When a profile is applied, the attributes applied from the profile appear in
blue.
Step 4 Configure the parameters displayed in the POS Config tab, as required. See “POS Interface
Configuration Window—Detailed Description” section on page 8-17 for further details.
Step 5 Click Save to save your configuration changes.
Step 6 Choose File > Close to close the window.