Filter
Top Products
4-4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Management Information
Figure 4-1 Management Information Window—Configuration Tab
Step 2
Choose an IOS Host from the list box displayed at the left of the window.
System Configuration
To configure the fields within the Configuration tab, proceed as follows:
Step 1 Open the Management Information window. See “Viewing the Management Information Window”
section on page 4-3 for further details.
Step 2 Choose a chassis from the list box displayed at the left of the window.
Step 3 Configure the fields in the Configuration tab. For detailed information on the fields in this tab, see
“Management Information Window—Detailed Description” section on page 4-6.
Note If the operator enters an invalid IP address, for example, a different device (not a Cisco 12000
Series Router or a different variant to that currently deployed) then the chassis object will enter
the mismatched state and a critical alarm will be raised. Modules and interfaces are moved into
the mismatched state. These should be ignored. To recover, the chassis should be
decommissioned, the correct IP address entered, saved and the chassis commissioned again.
Step 4 Click Save to save your changes.