Filter
Top Products
4-39
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
RPR Configuration
Figure 4-19 RPR Configuration Window
Step 2
Choose a Chassis from the list displayed at the left side of the window. For further information on the
fields displayed in this window, see RPR Configuration Window—Detailed Description for further
details.
RPR Configuration Window—Detailed Description
The RPR Configuration window displays two tabs: Configuration and Switch Over
Configuration Tab
Redundancy Mode—Displays and sets the redundancy mode of the selected chassis. The redundancy
mode can be RPR, RPR- Plus or SSO
Note If the mode of the RP changes, then the standby RP is reloaded.
Preferred RP—Displays and sets the value (either “Active Slot No” or “Standby Slot No”) that
determines the active RP on the next reload.