Filter
Top Products
11-12
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
Access List Configuration
Access List Configuration Window—Detailed Description
The Access List Configuration window contains one button, Create. The Create button is used to create
an access list. When you choose Create, a new access list of type IP standard is created and the next
available index is assigned. The access list type can be changed and saved if desired. When the access
list type is changed, the index can be manually or automatically reallocated to the next available index
for the new type selected.
The Access List Configuration window displays five tabs: General, IP Standard, IP Precedence, MAC,
and IP Extended.
Note The General tab is always accessible. One of the corresponding tabs, based on the access list type, is also
accessible. Any non-relevant tabs are grayed out. The fields in all the tabs are populated with default
values. The fields can be changed as desired.
General Tab
The General tab contains a single General tab.
General
The General tab displays four fields:
Index Allocation Mode—Possible values are Manual or Automatic. When the access list type is changed,
the index can be manually or automatically reallocated to the next available index for the new type
selected.
Index—Identification number for an access list. The Index field is automatically generated if the Index
Allocation Mode is set to Automatic.
Type—Lists the type of access list. Possible types include: IP Standard, IP Precedence, MAC and
IP Extended.
Logging Level—(This field is only applicable to IP standard and IP extended access lists). If you enable
the logging level, then informational messages about the packet that matched the criteria specified in the
access list are generated.