Filter
Top Products
14-4
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Configuration
Figure 14-1 BGP Configuration Window—BGP Details
Step 2
Choose the chassis from the left side of the window.
BGP Details Tab—Detailed Description
The BGP-Details tab displays two areas: BGP General and BGP Information
BGP General
Local Autonomous System—The id of the BGP process running in the device. If the value is 0 it means
no BGP process is running on the device.
Actions
Enable—The Enable action button is active when there is no BGP running on the device. Clicking Enable
action button opens the BGP Enable window through which the user can create a new BGP process in
the device. For more details on enabling BGP on a chassis, see “Enabling BGP on a Chassis” section on
page 5.
Disable—The Disable action button is active when there is a BGP process running in the device.
Clicking Disable action button removes the BGP process running in the device. For more details on
disabling BGP, see “Disabling BGP on a Chassis” section on page 8.