Filter
Top Products
15-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 15 MPLS Management
Fault Management for MPLS LSR Interfaces
Figure 15-2 MPLS Interface Status Window—Interface Setup Tab
Step 2
Choose a Chassis, Module and then Interface from the list box displayed at the left of the window. The
MPLS Interface Status Details information for the selected interface appears. For further information,
see the “MPLS Interface Status Window—Detailed Description” section on page 15-7.
MPLS Interface Status Window—Detailed Description
The MPLS Interface Status window (see Figure 15-2) displays a single Interface Setup tab.
Interface Configuration Tab
The Interface Setup tab displays a General and an MPLS area.
General
The General area displays the following information:
Operational Status—Displays information about the current operational status of the selected MPLS
active interface (up or down).
Last Change—Displays the value of the sysUpTime at the time the MPLS active interface entered its
current operational status.
MTU—Displays the size of the largest packet that can be sent/received on the selected MPLS active
interface.
Counter Discontinuity Time—Displays the value of the sysUpTime on the most recent occasion at which
any one or more of this MPLS active interfaces counters suffered a discontinuity.