Filter
Top Products
3-31
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 3 Getting Started
Deployment
User Named vs. Auto Named Module Deployment
When you deploy a module, you have two initial options:
• To deploy an auto-named module
• To deploy a user-named module
The user-named option allows you to name the module as you like. For example, if you have a specific
naming scheme you want to use, then select the user-named option.
The auto-named option assigns an auto-generated name to the module, with the slot number appended
to the name. For example, if you deployed an auto-named ATM line card in slot 5, the name given would
be “A5.” This option is most useful when you have numerous line cards of the same type to deploy.
However, the line cards must be deployed in sequence within the slots. For example, if you wanted to
deploy five ATM line cards in slots 1 to 5, then the auto-named option would be ideal.
Manually Deploying a GRP Card
Each chassis must have at least one GRP card deployed. A second optional GRP card can be deployed
for the purpose of redundancy.
Note This feature is not applicable to the 10720 chassis
To deploy a GRP, proceed as follows:
Step 1 Right-click on the slot within the chassis where you want the GRP to be deployed, then choose
Deployment>Cisco 12000/10720 Manager>Module>RP>GRP. The Deployment Wizard appears.