Filter
Top Products
14-35
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Address Family Configuration
Action
Add Network Entry—Clicking the “Add Network Entry” button, adds the network entry for the address
family on the device.
Remove Network Entry—Clicking the “Remove Network Entry” button, removes the network entry for
the address family on the device.
Viewing the AF-Neighbor Tab on the BGP Address-Family Configuration
Window
The AF-Neighbor tab displays the neighbor information (peer) for a BGP address family. The user can
add or remove neighbor entries for an address family. To view the AF-Neighbor tab on the BGP
Address-Family Configuration window for a chassis, proceed as follows:
Step 1 Open the BGP Address-Family Configuration window. See “Viewing the AF-General Tab on the BGP
Address-Family Configuration Window” section on page 14-27 for further details.
Step 2 Click on the AF-Neighbor tab.
Figure 14-23 BGP Address-Family Configuration Window—AF-Neighbor Tab
Step 3
Choose the Chassis and the Address Family from the left side of the window.