Filter
Top Products
14-11
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Configuration
BGP Network Configuration
The BGP Network Configuration window allows the user to add or remove a network entry to be
advertised through the BGP Network. To configure the BGP Network, proceed as follows:
Step 1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the BGP Configuration
Window” section on page 14-3 for further details. Click on the Network tab.
Step 2 Choose the chassis, for which you want to configure the BGP path, from the left side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you to launch the BGP
Network Configuration window for the selected chassis.
Step 3 Click Add/Remove Network. The BGP Network Configuration window appears.
Figure 14-6 BGP Network Configuration Window
Step 4 Edit the fields displayed in the window, as required.
BGP Network Configuration Window—Detailed Description
The BGP Network Configuration window displays the following:
Local AS—The Autonomous System number in the router.